Cara Mengetahui Kecepatan Ethernet Dedicated Server / Virtual Private Server (VPS)

Ingin tahu berapa kecepatan ethernet VPS/DS Anda ?

Silahkan login ke SSH, lalu ketikkan perintah berikut ini untuk mengetahui eth yang aktif :

sudo ip link show

Maka akan muncul hasil seperti ini :

$ 1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: mtu 1500 qdisc mq state UP qlen 1000
link/ether b8:ac:6f:65:31:e5 brd ff:ff:ff:ff:ff:ff
3: wlan0: mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:21:6a:ca:9b:10 brd ff:ff:ff:ff:ff:ff
4: vboxnet0: mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
5: pan0: mtu 1500 qdisc noop state DOWN
link/ether c2:10:fa:55:8e:32 brd ff:ff:ff:ff:ff:ff
6: vmnet1: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:50:56:c0:00:01 brd ff:ff:ff:ff:ff:ff
7: vmnet8: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:50:56:c0:00:08 brd ff:ff:ff:ff:ff:ff
11: ppp0: mtu 1496 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp

Where,

lo – Loopback interface.
eth0 – My first Ethernet network interface on Linux.
wlan0 – Wireless network interface in Linux.
ppp0 – Point to Point Protocol network interface which can be used by dial up modem, PPTP vpn connection, or 3G wireless USB modem.
vboxnet0, vmnet1, vmnet8 – Virtual machine interface working in bridge mode or NAT mode on Linux.

Lalu ketik command :

ethtool eth0 | less

dan

ethtool eth0 | grep -i speed

Sharing is caring!